While starting the system, you can get the error saying “disk boot failure, insert system disk and press enter” which requires an immediate solution to operate your system any further. Well known reasons behind this error are “changing hardware configuration”, “installing any malfunctioned software”, “altering the BIOS settings” etc. after which the system will become inaccessible and the important data may become damaged. Sometime, any floppy disk or CD/DVD inside the drive could also leads to this weird error but can be easily sorted out by removing the floppy disk or CD's from the appropriate drive.
This error signifies that hard disk of the system are become damaged or corrupted and interrupting Windows to start in properly manner. There is also a probability that the drive is nearing to its end and couldn't be detected any more by the installed Windows. After this, installing a fresh copy of Windows is the only available solution but results to severe data loss which can't be recovered without using any third party partition recovery tool. This recovery software uses strong mechanism to detect and recover the lost, deleted or formatted data from the local drive.
Steps to fix “Disk Boot Failure, Insert System Disk and Press Enter” Error:
Disk in the drive:
This is the most basic but recommended solution to use first in this case. You have to remove the disk (if there is any) from floppy drive, combo drive or unplug any attached external storage media devices i.e. USB, external hard disks, memory cards
Check cable and power options:
Check and see if the power cable is not properly connected to the hard drive – If so, then do the needful. Meanwhile, you have to do the same for SATA cable, motherboard cable etc.
Verify BIOS Settings:
Go to your BIOS settings by pressing delete or F12 button (check and see which one is working in your system), and ensure yourself that the hard disk is listed on your BIOS. Set the order of the hard disk at top of all the other booting devices.
Steps to fix “Disk Boot Failure, Insert System Disk and Press Enter” Error:
Disk in the drive:
This is the most basic but recommended solution to use first in this case. You have to remove the disk (if there is any) from floppy drive, combo drive or unplug any attached external storage media devices i.e. USB, external hard disks, memory cards
Check cable and power options:
Check and see if the power cable is not properly connected to the hard drive – If so, then do the needful. Meanwhile, you have to do the same for SATA cable, motherboard cable etc.
Verify BIOS Settings:
Go to your BIOS settings by pressing delete or F12 button (check and see which one is working in your system), and ensure yourself that the hard disk is listed on your BIOS. Set the order of the hard disk at top of all the other booting devices.
Corrupted Disk:
Corrupted or damaged disk are most hidden aspects behind this reason and should be taken seriously as it contains all the important data. Damaged partition could also cause this after which, you need to format the drive or partition completely with desired Windows installation CD.
Malfunctioned or modified system files:
Windows contains several exe and dll files (called system files) and any type of modification into these files could results in immediate system crash, freezing, booting failure etc. System files such as boot.ini, ntfs.sys etc. are containing the important information to boot the specified drive and absence or modification in any of these will results in booting failure of PC. If this is the case happens with your system, you can check and fix it in two easy steps:
- By inserting the Windows installation CD to your CD/DVD Drive and after restarting, you have to run the system repair option by pressing 'R' key which will repair and replace any missing or corrupted system files,
- By running CHKDSK c:/f command on command prompt which will fix the drive errors and leave the system files intact. If the problem still persists, then again run the command CHKDSK c:/r which locates and recovers the readable information of the drive and can make your drive to work again.
If none of the way's are working, then just do a complete format of the system but doing this will erase the data from your hard drive. If you don't want to loose the data contained in the drive, then you have to stop using the hard drive and purchase any well known data recovery software which will surely recover and save your life's work.
While starting the system, you can get the error saying “disk boot failure, insert system disk and press enter” which requires an immediate solution to operate your system any further. Well known reasons behind this error are “changing hardware configuration”, “installing any malfunctioned software”, “altering the BIOS settings” etc. after which the system will become inaccessible and the important data may become damaged. Sometime, any floppy disk or CD/DVD inside the drive could also leads to this weird error but can be easily sorted out by removing the floppy disk or CD's from the appropriate drive.
This error signifies that hard disk of the system are become damaged or corrupted and interrupting Windows to start in properly manner. There is also a probability that the drive is nearing to its end and couldn't be detected any more by the installed Windows. After this, installing a fresh copy of Windows is the only available solution but results to severe data loss which can't be recovered without using any third party partition recovery tool. This recovery software uses strong mechanism to detect and recover the lost, deleted or formatted data from the local drive.
Steps to fix “Disk Boot Failure, Insert System Disk and Press Enter” Error:
Disk in the drive:
This is the most basic but recommended solution to use first in this case. You have to remove the disk (if there is any) from floppy drive, combo drive or unplug any attached external storage media devices i.e. USB, external hard disks, memory cards
Check cable and power options:
Check and see if the power cable is not properly connected to the hard drive – If so, then do the needful. Meanwhile, you have to do the same for SATA cable, motherboard cable etc.
Verify BIOS Settings:
Go to your BIOS settings by pressing delete or F12 button (check and see which one is working in your system), and ensure yourself that the hard disk is listed on your BIOS. Set the order of the hard disk at top of all the other booting devices.
Steps to fix “Disk Boot Failure, Insert System Disk and Press Enter” Error:
Disk in the drive:
This is the most basic but recommended solution to use first in this case. You have to remove the disk (if there is any) from floppy drive, combo drive or unplug any attached external storage media devices i.e. USB, external hard disks, memory cards
Check cable and power options:
Check and see if the power cable is not properly connected to the hard drive – If so, then do the needful. Meanwhile, you have to do the same for SATA cable, motherboard cable etc.
Verify BIOS Settings:
Go to your BIOS settings by pressing delete or F12 button (check and see which one is working in your system), and ensure yourself that the hard disk is listed on your BIOS. Set the order of the hard disk at top of all the other booting devices.
Corrupted Disk:
Corrupted or damaged disk are most hidden aspects behind this reason and should be taken seriously as it contains all the important data. Damaged partition could also cause this after which, you need to format the drive or partition completely with desired Windows installation CD.
Malfunctioned or modified system files:
Windows contains several exe and dll files (called system files) and any type of modification into these files could results in immediate system crash, freezing, booting failure etc. System files such as boot.ini, ntfs.sys etc. are containing the important information to boot the specified drive and absence or modification in any of these will results in booting failure of PC. If this is the case happens with your system, you can check and fix it in two easy steps:
- By inserting the Windows installation CD to your CD/DVD Drive and after restarting, you have to run the system repair option by pressing 'R' key which will repair and replace any missing or corrupted system files,
- By running CHKDSK c:/f command on command prompt which will fix the drive errors and leave the system files intact. If the problem still persists, then again run the command CHKDSK c:/r which locates and recovers the readable information of the drive and can make your drive to work again.
If none of the way's are working, then just do a complete format of the system but doing this will erase the data from your hard drive. If you don't want to loose the data contained in the drive, then you have to stop using the hard drive and purchase any well known data recovery software which will surely recover and save your life's work.
0 comments:
Post a Comment